Product Testing & Calibration Unit  
        About Us | Rubber Products | Bearings | Seals | Condoms | Exam Gloves | Surgical Gloves |
Household & Industrial Gloves | Tyre Testing | Calibration Services/Sales | Others | Contact
  Product Testing &
  Calibration Unit
Materials Characterisation
  Unit		     Product Testing & Calibration Unit

Rubber Bearings
Type of Tests/Properties Measured
Standard Test Methods/Specificaions
1   Tensile Properties
2   Ageing
3   Shear Modulus
4   Compression Set
5   Ozone Resistance
6   Bonding Strength
7   Hardness
8   Stiffness in Shear
9   Stiffness in Compression
10 Dimensions 		BS 5400 : Section 9.2 (1983)
1   Tensile Properties
2   Ageing
3   Compression Set
4   Ozone Resistance
5   Bonding Strength
6   Hardness
7   Stiffness in Shear
8   Dimensions
9   Stiffness in Compression
 MS 671: Part 1:1991
1   Stiffness in Compression
2   Stiffness in Shear
3   Ageing
4   Ozone Resistance
5   Tensile Properties
6   Elongation at Break
7   Tear Resistance
8   Compression Set		 AS 1523 (1981)
1   Tensile Properties
2   Ageing
3   Shear Modulus
4   Compression Set
5   Ozone Resistance
6   Bonding Strength
7   Hardness
8   Stiffness in Shear
9   Stiffness in Compression
10 Dimensions 		PLUS 2100 (1988)
1   Stiffness in Compression
2   Stiffness in Shear
3   Bonding Strength
4   Hardness
5   Tensile Properties
6   Compression Set
7   Accelerated Ageing
8   Ozone Resistance		 BS 6177:1982
1   Stiffness in Compression
2   Stiffness in Shear
3   Tensile Properties
4   Hardness
5   Compression Set
6   Ozone Resistance
7   Ageing
8   Bonding Strength
9   Preparation of Samples		 JKR/SPJ/1988 (Reapproved 1991)
Section 13
1   Tensile Properties
2   Hardness
3   Ageing
4   Compression Set
5   Ozone Resistance
6   Stiffness in Compression
7   Bonding or Adhesion		 AASHTO Section 25 :1983
1   Tensile Properties
2   Hardness
3   Ageing
4   Compression Set
5   Shear Modulus
6   Ozone Resistance
7   Stiffness in Compression		 ASTM D4014:1989
1   Tensile Properties
2   Hardness
3   Ageing
4   Compression Set
5   Shear Modulus
6   Ozone Resistance
7   Adhesion Strength
8   Tear Strength
9   Resistance to Creep
 ISO 6446:1994

Rubber Seals
Type of Tests/Properties Measured
Standard Test Methods/Specificaions
Properties of compound

1   Tensile properties
2   Hardness
3   Compression set
4   Accelerated ageing
5   Water immersion
6   Oil resistance
7   Stress relaxation
8   Ozone resistance

AS 1646.2, Section 3 - 2000 MS 672, Section 3 : 1999
Properties of finished products

1   Tensile properties
2   Micro-hardness
3   Compression set
4   Accelerated ageing
5   Water immersion
6   Oil resistance
7   Stress relaxation
8   Ozone resistance
9   Preparation of test piece

AS 1646.2, Section 3 - 2000 MS 672, Section 3 : 1999


The Government and Malaysian Rubber Board shall not be liable for any loss or damage caused by the usage of any information obtained from this site.
Malaysian Rubber Board 2002. All Rights Reserved.  Best viewed with Internet Explorer 6.x browser.